×
Discuss on T24 Installation, Setting up the environment, TC Server, jBOSS, Package & Deployment, etc…
STANDING.ORDER CHARGE
- leopoje
-
Topic Author
- Offline
- Senior Member
-
Less
More
- Posts: 71
- Thank you received: 0
9 years 1 month ago #17132
by leopoje
If it was so, it might be; and if it
were so, it would be; but as it isn’t, it ain’t. That’s logic... (computerrage)
STANDING.ORDER CHARGE was created by leopoje
I have done a version to create an STANDING.ORDER(STO) instruction on the system, which must collect one time charge on creating the instruction and then another which will be charged every-time an FT has been done depending on that instruction. I have a challenge when i try to use the version which is as below screen shot, i have also attached the version for the STO application. May anyone please assist.
If it was so, it might be; and if it
were so, it would be; but as it isn’t, it ain’t. That’s logic... (computerrage)
Please Log in or Create an account to join the conversation.
- Valleyman1
- Offline
- Elite Member
-
Less
More
- Posts: 292
- Thank you received: 24
9 years 5 days ago #17420
by Valleyman1
Replied by Valleyman1 on topic STANDING.ORDER CHARGE
Please put the frequency on the Charge Frequency2. You have put date only. I have tried the setup for STOCHG and is working normally on my environment. Please check the STOCHG commission. You can post it here also
Please Log in or Create an account to join the conversation.
Time to create page: 0.098 seconds